Zu Produktinformationen springen
Heckklappen-Lichtleiste für Pickup
Angebotspreis
$12.75
Normaler Preis
$15.94
Versandkosten werden beim Checkout berechnet.
PRODUKTBESCHREIBUNG
48 Zoll Fishbone Heckklappen-Lichtleiste, LED-Lichtleiste, Bremse, sequentieller Blinker hinten, Stroboskoplampe mit 4-poligem Flachstecker für LKW, Pickup, Anhänger, SUV, Wohnmobil, Van, Jeep, Auto, unverzichtbare Produkt-Goodies, Sommerschlussverkauf, Herrengeschenk
- 【Superhelle Heckklappen-Lichtleiste】 Die LED-Heckklappen-Lichtleiste verfügt über 528 Stück 2835SMD-LED-Chips, 276 rote und 252 gelbe. Dynamische Lichtstreifen, die horizontale Blinker und Blinker mit Pfeilmuster kombinieren, zeigen eine ultrahelle Beleuchtung und auffälligere Muster, um Sichtbarkeit und Sicherheit zu verbessern.
- 【Lichtleiste mit allen Funktionen】 Mehrere Funktionen wie Fahrlichter, Rückfahrlichter, Bremslichter, Blinker und Standlichter sorgen für eine bessere Sicht für die Fahrer hinten. Lauflichtmodus im roten Scan von der Mitte zur Seite, linker und rechter Blinkermodus im gelben Scan auf einer Seite.
- 【IP68 wasserdichte Blinklichter】 Rostfreier Rahmen, IP68 wasserdichtes, vollständig versiegeltes Silikon, lange Lebensdauer, hält rauen Wetterbedingungen stand. Hochintensive LED-Chips bieten maximale Abdeckung und hohe Sichtbarkeit bei Tag, Nacht, Regen oder Nebel, 200 % heller als normale einreihige LED.
- 【Einfach und schnell zu installieren】 Mit standardmäßigem 4-poligen Flachstecker für Plug-and-Play. Einfach den Heckklappen-Lichtmast abziehen und mit einem starken Auto-Klebstoffverstärker aufkleben, der die Haltekraft um mehr als das Fünffache erhöhen kann, ohne dass Sie sich Sorgen machen müssen, dass er herunterfällt.
- 【Universell einsetzbar】 Die Heckklappen-Lichtleiste kann problemlos an jedem LKW mit mindestens 60 Zoll Heckklappe installiert werden. Gilt für Fahrzeuge mit 12-V-Gleichstromversorgung, einschließlich passend für Ford, Chevrolet, GMC, Dodge und die meisten Autos, Pickups, LKWs, SUVs, Wohnmobile, Vans, Anhänger usw. Verleihen Sie Ihrem Fahrzeug ein stilvolles Gesamtbild und mehr Sicherheit.
SPECIFICATIONS
| Product Type | Fishbone pickup tailgate LED light bar |
|---|---|
| Main Use | Rear tailgate accent lighting, brake light, running light, turn signal, and hazard light effects |
| Light Source | LED |
| Lighting Functions | Brake light, running light, left turn signal, right turn signal, and double-flash hazard light |
| Color Pattern | Red and amber |
| Length Options | 122 cm / 48 inches or 152 cm / 60 inches |
| Width | 2 cm / 0.79 inches |
| Thickness | 0.6 cm / 0.24 inches |
| Connector | 4-pin connector with wiring harness |
| Mounting Method | Adhesive tailgate mounting |
| Fit Type | Universal rear tailgate fit for many pickups, trucks, SUVs, RVs, vans, and trailers; measure before ordering |
| Water Resistance | Waterproof design |
| Protection | Inline protection circuit shown in product materials |
| Package Includes | 1 LED tail light bar strip, 4-pin connector, instruction sheet, and mounting accessories |
| Certifications / Compliance | FCC, CE, DOT, EU DoC, WEEE |
Installation & Power
Measure First
- Measure the tailgate mounting path before choosing 48 inches or 60 inches. Make sure the strip will not block the tailgate handle, backup camera, license plate, hitch, or factory lights.
Surface Prep
- Clean and dry the mounting area before installing. Peel the adhesive backing only when you are ready to place the strip, then press firmly along the full length.
Wiring
- Use the included 4-pin connector and follow the wiring guide for ground, running light, left turn, and right turn functions. If you are not comfortable with vehicle wiring, have the install checked by a qualified installer.
Function Test
- Test brake, running light, left turn signal, right turn signal, and hazard functions before finalizing the cable routing.
Use Notes
- Do not splice randomly into unknown wires. Keep wiring away from moving tailgate parts, sharp edges, exhaust heat, and areas where water can collect.
FAQ
Which length should I choose?
Choose 122 cm / 48 inches for shorter tailgate spaces and 152 cm / 60 inches for wider rear mounting paths. Measure your truck before ordering so the strip fits cleanly.
What lighting functions does it support?
It supports brake light, running light, left turn signal, right turn signal, and double-flash hazard light effects.
Is this only for pickup trucks?
It is designed mainly for pickup tailgates, but it can fit many trucks, SUVs, RVs, vans, and trailers if the mounting path and wiring setup are suitable.
Does it need wiring?
Yes. This is not a rechargeable light. It uses a 4-pin connector and wiring harness, so you should follow the included guide and test each function before final routing.
Can I install it myself?
You can install it if you are comfortable cleaning the mounting surface, applying the adhesive strip, and connecting vehicle lighting wires. If you are unsure, we recommend asking a qualified installer to check the wiring.
Is it waterproof?
The product is built with a waterproof design for rear exterior use, but you should still keep connectors protected and avoid routing wires where water can sit.
SHIPPING & RETURNS
We keep shipping and returns clear so you know what to expect before ordering.
- Processing Time: Orders are typically processed within 1-3 business days after payment is confirmed.
- Delivery Estimate: Estimated delivery is 5-14 business days worldwide after dispatch.
- Tracking: A tracking number is sent by email after your order ships. Tracking updates may take 1-3 business days to appear.
- Returns: Eligible items can be requested for return or exchange within 30 days of delivery when unused, uninstalled, and kept in original packaging.
- Damaged, Defective, or Incorrect Items: Please contact us within 48 hours of delivery with your order number and clear photos or videos so we can help quickly.
Need more details? Read our full Shipping Policy and Refund Policy.