Custom Artwork Car Door Projector Lights by Diives
PRODUKTBESCHREIBUNG
Your door opening can feel like a small reveal instead of a plain puddle light. We made these custom artwork car door projector lights for a more personal welcome glow, using rechargeable projectors that cast Diives artwork onto the ground when the door opens after dark.
Why You Will Like It
- Projects a 2-frame animated artwork effect instead of a standard logo light.
- Rechargeable design means you do not need to replace batteries or wire into the car door.
- Slide-and-detach base makes charging easier without removing the adhesive mount every time.
- Auto light-sensing helps the projector stay off in strong daylight and turn on at night or on cloudy days.
A Door Light With Personality
This is not a factory-style courtesy lamp. It is a small visual upgrade for people who want their car setup to feel more personal, playful, and noticeable at night. Choose the Diives artwork variant you want, then mount the projector where it can cast clearly when the door opens.
Fit Check Before Ordering
Before you order, check the inside of your car door. The projector needs a flat interior mounting surface so the adhesive base can sit securely. If the inner door panel is curved or heavily textured, the light may not attach well or project cleanly.
Rechargeable and Easy to Remove
Press the release button to slide the projector off the base for charging, then slide it back on after charging. A full charge can last up to 30 days depending on how often the door is opened, projection time, and light-sensing conditions.
SPECIFICATIONS
| Product Type | Rechargeable custom artwork car door projector lights |
|---|---|
| Best For | Door-opening welcome projection, personal car styling, night entry glow, and adult-themed Diives artwork display |
| Projection Style | 2-frame animated artwork projection |
| Artwork Options | Xigua/Zhongzi 18+ by Diives, Wuhuaguo 18+ by Diives, and Tang 18+ by Diives |
| Pack Quantity | 1 set of 2 projector lights |
| Power Source | USB rechargeable built-in battery |
| Runtime | Up to 30 days per full charge, depending on use |
| Activation | Auto light-sensing; stays off in strong daylight and turns on at night or on cloudy days |
| Mounting Method | Slide-and-detach 3M adhesive base |
| Fit Requirement | Requires a flat interior door-panel surface for secure mounting and clean projection |
| Size | 6 cm / 2.36 inches high, 5 cm / 1.96 inches wide, and 2.3 cm / 0.9 inches deep |
| Material | Plastic and resin |
| Water Resistance | Waterproof design |
| Certifications / Compliance | FCC, CE, DOT, EU DoC, WEEE |
| Package Includes | 1 set of 2 projector lights in the selected artwork style |
INSTALLATION & POWER
These are rechargeable adhesive-base door projector lights. Check your door surface before ordering, mount the base on a flat interior panel, then slide the projector off the base whenever it needs charging.
Before Installation
- Check that the inside of your door has a flat area for the adhesive base.
- Do not install on a curved, heavily textured, dusty, oily, or wet surface.
- If your car already has a strong built-in door light, install this projector away from the original light so the sensor is not affected.
- For pure black door thresholds, use the sensor stickers as needed so the light can detect the door position more reliably.
Installation Steps
- Prepare the base: Peel the adhesive backing from the base.
- Place on the door: Stick the base onto a flat interior door-panel position where the projector can cast onto the ground.
- Attach the projector: Slide the projector body onto the mounted base until it sits securely.
- Charge when needed: Press the release button, slide the projector off the base, and charge it through the USB port.
- Power on or off: Long press the button for about 2 seconds to turn the projector on or off.
- Test the sensor: Open and close the door in a low-light area to confirm the projection appears in the right position.
Power Notes
- USB rechargeable design; no hardwiring required.
- One full charge can last up to 30 days depending on use.
- The auto light sensor turns the projector off under strong sunlight to save power.
- Recharge before long-term storage and avoid leaving the battery fully drained for long periods.
FAQ
1. Will this fit my car door?
2. Do I need to wire it into my car?
3. How long does one charge last?
4. Why does the light not turn on during the day?
5. What are the sensor stickers for?
6. How do I charge it?
7. What is included in the package?
8. Is the artwork suitable for everyone?
SHIPPING & RETURNS
We keep shipping and returns clear so you know what to expect before ordering.
- Processing Time: Orders are typically processed within 1-3 business days after payment is confirmed.
- Delivery Estimate: Estimated delivery is 5-14 business days worldwide after dispatch.
- Tracking: A tracking number is sent by email after your order ships. Tracking updates may take 1-3 business days to appear.
- Returns: Eligible items can be requested for return or exchange within 30 days of delivery when unused, uninstalled, and kept in original packaging.
- Damaged, Defective, or Incorrect Items: Please contact us within 48 hours of delivery with your order number and clear photos or videos so we can help quickly.
Need more details? Read our full Shipping Policy and Refund Policy.