Skip to product information
48-inch pickup tailgate light bar with 0.79-inch width for shorter rear mounting paths and compact truck setups.
  • 48-inch pickup tailgate light bar with 0.79-inch width for shorter rear mounting paths and compact truck setups.
  • Pickup tailgate light bar installed across the rear of a truck for stronger brake and signal visibility after dark.
  • Fishbone tailgate light bar with 48-inch and 60-inch options plus red, amber, and reverse light signal functions.
  • Dynamic tailgate light bar functions for brake lights, turn signals, reverse lights, running lights, and hazard flashes.
  • Pickup tailgate light bar wiring FAQ with surface prep, 4-pin connection, and truck lighting troubleshooting tips.
  • Pickup tailgate LED bar designed for rear exterior styling across rain, snow, fog, and night driving conditions.
  • Pickup tailgate light bar adds a brighter red and amber rear lighting line for bold truck styling at night.
  • Pickup tailgate light bar with smart chip control, bright LEDs, low-temperature resistance, and weather-ready protection.
  • Tailgate light bar package with LED strip, 4-pin connector, instruction sheet, mounting accessories, and protection circuit.
  • Pickup tailgate light bar package with front and back box views plus rear signal lighting scenes for road visibility.
  • 60-inch pickup tailgate light bar with 0.79-inch width for wider truck tailgates and full rear accent coverage.
Pickup Tailgate Light Bar with Brake and Signal LEDs

Pickup Tailgate Light Bar with Brake and Signal LEDs

€11,95
Taxes included. Shipping calculated at checkout.
Length
PRODUCT DESCRIPTION

The rear end of your truck is one of the first things people see on the road, at a job site, or out on the trail. This pickup tailgate light bar adds a long fishbone-style LED line across the tailgate, giving your truck a bolder rear profile with brake, running, turn-signal, and hazard lighting functions.

Why You Will Like It

  • Adds a sharp fishbone LED pattern that looks more distinctive than a plain red strip.
  • Supports brake light, running light, left turn signal, right turn signal, and double-flash hazard effects.
  • Comes in 122 cm / 48 inches and 152 cm / 60 inches options so you can match your tailgate width.
  • Uses adhesive mounting and a 4-pin connector setup for a cleaner rear-tailgate installation.

Built for Pickup Rear Styling

The red and amber LED layout gives your truck a stronger rear lighting signature without hiding the original tail lights. It works especially well on pickups where you want the tailgate area to look wider, brighter, and more finished after dark.

Measure Before You Choose

Pick 48 inches for shorter tailgate spaces and 60 inches when your truck has a wider rear mounting path. Measure the flat area below or across the tailgate before ordering, and make sure the strip will not block the handle, camera, license plate, trailer hitch, or factory lights.
SPECIFICATIONS
Product Type Fishbone pickup tailgate LED light bar
Main Use Rear tailgate accent lighting, brake light, running light, turn signal, and hazard light effects
Light Source LED
Lighting Functions Brake light, running light, left turn signal, right turn signal, and double-flash hazard light
Color Pattern Red and amber
Length Options 122 cm / 48 inches or 152 cm / 60 inches
Width 2 cm / 0.79 inches
Thickness 0.6 cm / 0.24 inches
Connector 4-pin connector with wiring harness
Mounting Method Adhesive tailgate mounting
Fit Type Universal rear tailgate fit for many pickups, trucks, SUVs, RVs, vans, and trailers; measure before ordering
Water Resistance Waterproof design
Protection Inline protection circuit shown in product materials
Package Includes 1 LED tail light bar strip, 4-pin connector, instruction sheet, and mounting accessories
Certifications / Compliance FCC, CE, DOT, EU DoC, WEEE
Installation & Power

Measure First

  • Measure the tailgate mounting path before choosing 48 inches or 60 inches. Make sure the strip will not block the tailgate handle, backup camera, license plate, hitch, or factory lights.

Surface Prep

  • Clean and dry the mounting area before installing. Peel the adhesive backing only when you are ready to place the strip, then press firmly along the full length.

Wiring

  • Use the included 4-pin connector and follow the wiring guide for ground, running light, left turn, and right turn functions. If you are not comfortable with vehicle wiring, have the install checked by a qualified installer.

Function Test

  • Test brake, running light, left turn signal, right turn signal, and hazard functions before finalizing the cable routing.

Use Notes

  • Do not splice randomly into unknown wires. Keep wiring away from moving tailgate parts, sharp edges, exhaust heat, and areas where water can collect.
FAQ

Which length should I choose?

Choose 122 cm / 48 inches for shorter tailgate spaces and 152 cm / 60 inches for wider rear mounting paths. Measure your truck before ordering so the strip fits cleanly.

What lighting functions does it support?

It supports brake light, running light, left turn signal, right turn signal, and double-flash hazard light effects.

Is this only for pickup trucks?

It is designed mainly for pickup tailgates, but it can fit many trucks, SUVs, RVs, vans, and trailers if the mounting path and wiring setup are suitable.

Does it need wiring?

Yes. This is not a rechargeable light. It uses a 4-pin connector and wiring harness, so you should follow the included guide and test each function before final routing.

Can I install it myself?

You can install it if you are comfortable cleaning the mounting surface, applying the adhesive strip, and connecting vehicle lighting wires. If you are unsure, we recommend asking a qualified installer to check the wiring.

Is it waterproof?

The product is built with a waterproof design for rear exterior use, but you should still keep connectors protected and avoid routing wires where water can sit.
SHIPPING & RETURNS

We keep shipping and returns clear so you know what to expect before ordering.

  • Processing Time: Orders are typically processed within 1-3 business days after payment is confirmed.
  • Delivery Estimate: Estimated delivery is 5-14 business days worldwide after dispatch.
  • Tracking: A tracking number is sent by email after your order ships. Tracking updates may take 1-3 business days to appear.
  • Returns: Eligible items can be requested for return or exchange within 30 days of delivery when unused, uninstalled, and kept in original packaging.
  • Damaged, Defective, or Incorrect Items: Please contact us within 48 hours of delivery with your order number and clear photos or videos so we can help quickly.

Need more details? Read our full Shipping Policy and Refund Policy.

New Arrival: Dynamic Rear Trunk Light Strip

Upgrade your ride with our latest rear trunk light strip featuring a dynamic scan start-up effect. Sleek, eye-catching, and built to impress — turn every ignition into a show.

You may also like