Christmas Car Door Projector Light | Animated Holiday Glow

Christmas car door projector light casting animated Santa sleigh and reindeer artwork beside an open vehicle door at night.

Rechargeable Christmas Car Door Projector Light for Holiday Car Decor

$12.99 $16.24

Versandkosten werden beim Checkout berechnet.

Turn a simple door opening into part of your Christmas car decor. This rechargeable Christmas car door projector light casts a two-frame holiday artwork sequence onto the ground after dark, creating a festive welcome glow without wiring into the door.

Three Holiday Scenes to Choose From

Santa Sleigh & Reindeer pairs a glowing sleigh scene with a reindeer-and-tree frame.
Snowman & Gingerbread House shifts between a cheerful snowman and a warmly lit holiday cottage.
Christmas Cottage & Tree combines a snowy homecoming scene with a decorated Christmas tree.
Each option includes 1 projector light with one selected two-frame artwork sequence.

Choose Your Projection Mode

Use the physical button on the projector to control the light and artwork display.

Long press the button to activate the projector; long press again to turn it off.
After activation, short press to cycle through fixed Frame 1, fixed Frame 2, two-frame alternating at Speed 1, and two-frame alternating at Speed 2.

A Small Christmas Detail With a Big Reveal

Add a seasonal touch for evening drives, Christmas light tours, holiday gatherings, winter road trips, and festive car displays. The animated ground projection appears when the door opens in darker conditions, so the decoration feels like part of the arrival instead of another item taking up cabin space.

Rechargeable and Easy to Remove

The projector mounts on a slide-and-detach adhesive base. Press the release button to remove the light for USB charging, then slide it back onto the mounted base. Auto light-sensing keeps it off under strong daylight and allows the projection to appear at night or on cloudy days.

Check Your Door Before Ordering

Choose a flat area on the inside of your car door where the adhesive base can sit securely and the lens can point toward the ground. Curved, heavily textured, dusty, oily, wet, or narrow mounting areas can make the projector harder to attach or align.

Product Type	Rechargeable Christmas car door projector light
Theme	Christmas and winter holiday car decoration
Projection Style	2-frame animated artwork projection
Artwork Options	Santa Sleigh & Reindeer; Snowman & Gingerbread House; Christmas Cottage & Tree
Pack Quantity	1 projector light per box
Power Source	USB rechargeable built-in battery
Runtime	Up to 30 days per full charge, depending on use
Activation	Auto light-sensing in darker conditions; long-press the physical button to turn the projector on or off; short-press to cycle through fixed Frame 1, fixed Frame 2, and two alternating-frame speeds
Mounting Method	Slide-and-detach 3M adhesive base
Fit Requirement	Requires a flat interior door-panel surface for secure mounting and clean projection
Size	6 cm / 2.36 inches high, 5 cm / 1.96 inches wide, and 2.3 cm / 0.9 inches deep
Material	Plastic and resin
Water Resistance	Waterproof design
Certifications / Compliance	FCC, CE, DOT, EU DoC, WEEE
Package Includes	1 rechargeable projector light in the selected Christmas artwork style

Mount the adhesive base on a flat interior door panel, test the projection position in low light, and slide the projector off the base whenever it needs charging.

Before installation

Check that the inside of your door has a flat area for the adhesive base.
Clean and dry the mounting area before applying the adhesive.
Keep the projector away from a strong built-in door light that could interfere with the sensor.
Use the sensor sticker when needed on a pure black threshold so the door-position sensor can read reliably.

Installation steps

Prepare the base: Peel the adhesive backing from the slide base.
Test the position: Hold the projector on a flat interior door-panel area and confirm that the artwork lands cleanly on the ground.
Mount the base: Press the adhesive base firmly onto the selected position.
Attach the projector: Slide the projector body onto the mounted base until it sits securely.
Power on or off: Long press the button for about 2 seconds to turn the projector on or off.
Test the sensor: Open and close the door in a low-light area to confirm the projection appears in the correct position.

Charging and lens adjustment

Press the release button and slide the projector off the base for USB charging.
A full charge can last up to 30 days depending on how often the door is opened and how long the projection runs.
The auto light sensor keeps the projector off under strong daylight to save power.
If the artwork angle needs correction, remove the rear cover and adjust the lens assembly using the supplied lens guide.

Will this Christmas car door projector fit my vehicle?

It is designed for many vehicles with a flat interior door-panel area. Curved, heavily textured, narrow, dusty, oily, or wet surfaces can prevent the adhesive base from holding securely or keep the projection from landing cleanly.

Do I need to wire the projector into my car?

No. The projector has a built-in rechargeable battery, so it does not need to connect to your vehicle wiring.

How does the 2-frame animated projection work?

Each option contains two Christmas artwork frames that alternate to create a simple animated welcome effect on the ground when the projector is active.

Why does the projector stay off during the day?

The built-in light sensor keeps the projector off under strong daylight to save power. It is designed to activate in darker conditions when the car door opens.

How long does one charge last?

A full charge can last up to 30 days depending on how often the door is opened, how long the projection stays on, and the surrounding light conditions.

How do I recharge the door projector?

Press the release button to slide the projector off the adhesive base, charge it through the USB port, and then slide it back onto the base.

What are the sensor stickers for?

The sensor sticker can improve door-position detection on pure black thresholds or surfaces where the sensor may not read the contrast clearly.

What comes in one box?

Each box includes 1 rechargeable car door projector light in the Christmas artwork option you select.

Wir gestalten Versand und Rückgabe transparent, damit Sie vor der Bestellung wissen, was Sie erwartet.

Bearbeitungszeit: Bestellungen werden in der Regel innerhalb von 1-3 Werktagen nach bestätigtem Zahlungseingang bearbeitet.
Voraussichtliche Lieferzeit: Die voraussichtliche Lieferung erfolgt weltweit innerhalb von 5-20 Werktagen nach dem Versand.
Sendungsverfolgung: Nach dem Versand erhalten Sie die Sendungsnummer per E-Mail. Es kann 1-3 Werktage dauern, bis die ersten Aktualisierungen angezeigt werden.
Rückgabe: Artikel, die die Rückgabevoraussetzungen erfüllen, können innerhalb von 30 Tagen nach der Lieferung zur Rückgabe oder zum Umtausch angemeldet werden. Eine angemessene Prüfung ist zulässig; Installation, Nutzung, Beschädigung, Veränderung oder fehlende Teile können, soweit gesetzlich zulässig, die Erstattung mindern oder eine Rückgabe ausschließen.
Beschädigte, defekte oder falsche Artikel: Kontaktieren Sie uns bitte innerhalb von 48 Stunden nach der Lieferung mit Ihrer Bestellnummer und deutlichen Fotos oder Videos, damit wir Ihnen schnell helfen können.

Weitere Informationen finden Sie in unserer Versandrichtlinie und Rückerstattungsrichtlinie.