Truck Hood LED Light Strip with Dynamic Startup Effect

White truck hood LED strip in 71-inch length for shorter hood lines and clean front-end styling.

Truck Hood LED Light Strip for Bold Front-End Styling

$12.05 $15.06

Shipping calculated at checkout.

Lighting Color White Ice Blue Red

Lengths 71 inches 79 inches 87 inches

Give the front of your truck a stronger night presence without turning the build into a wiring-heavy project. We made this truck hood LED light strip for pickup owners who want a bold front-end lighting accent, a clean hood-line glow, and a startup animation that feels custom the moment the vehicle powers on.

Made for Pickup Presence

Frames the hood or grille line with a sharper light signature for trucks, pickups, lifted builds, and daily drivers.
Creates a flowing dynamic startup scan before settling into a continuous LED accent line.
Gives your front end a wider, more planted look at night without adding a bulky external light bar.
ACC wiring with built-in fuse protection helps the strip switch with vehicle power when installed correctly.

Bold Without Looking Overbuilt

This page is tuned for drivers who want the truck to look more assertive from the front, especially in parking lots, truck meets, evening commutes, and back-road stops. The strip sits low and flexible along the hood edge or grille line, so the effect feels like part of the vehicle instead of a heavy add-on.

Color and Length Choices

Choose White for a clean, crisp front accent, Ice Blue for a cooler custom glow, or Red for a stronger show-style look. Measure your hood or grille-line path before ordering, then choose 71, 79, or 87 inches for the coverage you want.

Built for Exterior Accent Use

The silicone and PVC body has an IP68 waterproof structure for exterior styling. Clean and dry the mounting area first, use the included adhesion promoter packs when the surface is cold or the backing needs extra help, and connect the red wire to ACC power instead of directly to the battery.

Product Type	Dynamic startup truck hood LED light strip
Best For	Pickup hood-line, grille-edge, and bold front-end styling
Lighting Effect	Flowing startup scan followed by a continuous front-end LED accent line
LED Type	5050 SMD LEDs
Color Options	White, Ice Blue, and Red
Length Options	71 inches, 79 inches, and 87 inches
Vehicle Fitment	Universal fit for many pickups, trucks, cars, SUVs, vans, Jeeps, RVs, campers, trailers, and golf carts; measure the hood or grille-line path before ordering
Working Voltage	10V-15V
Wiring Method	Red wire to ACC positive; black wire to negative / ground. Do not connect the red wire directly to battery terminals
Fuse Protection	Built-in fuse protection on the LED light strip
Mounting Method	Rear adhesive backing with 2 included adhesion promoter packs
Material	Silicone and PVC
Water Resistance	IP68 Waterproof
Certifications	FCC, CE, UL, RoHS, IP68, EU DoC
Package Includes	1 truck hood LED light strip, 2 packs of adhesion promoter, and installation instruction

This is a wired exterior hood accent strip for trucks and other suitable vehicles. Test the strip before mounting, choose a clean hood or grille-line path, then connect red to ACC positive and black to ground.

Mounting Prep

Test the light strip before removing the adhesive backing.
Measure the hood edge or grille-line path before choosing 71, 79, or 87 inches.
Clean the surface thoroughly and let it dry before mounting.
Use the included adhesion promoter packs when the weather is cold, the surface is difficult, or the adhesive needs extra holding support.
Keep the strip away from high-heat areas, moving parts, sharp edges, and positions that could distract the driver.

ACC Wiring Steps

Position before pasting: Lay the strip along the planned hood edge or grille-line route and confirm the visual position before final mounting.
Find switched power: Use a tester to locate an ACC fuse that receives power when the vehicle is on and turns off when the vehicle is off.
Connect red to ACC: Connect the red wire to ACC positive. Do not connect the red wire directly to the battery terminals.
Connect black to ground: Connect the black wire to negative / ground using a secure grounding point.
Check the fuse: Confirm the fuse on the LED strip is seated properly before finalizing the installation.
Test the final effect: Start the vehicle and confirm the flowing startup scan and steady accent lighting work normally.

Power and Safety Notes

Working voltage: 10V-15V.
The light strip has built-in fuse protection, but correct ACC wiring is still required.
Do not wire the red lead directly to the battery, or the strip may stay on and drain the battery.
Professional installation is recommended if you are not comfortable working around the fuse box.

1. Is this hood LED strip made only for trucks?

No. This page is focused on truck and pickup styling, but the light strip has a universal fit. You can also use it on many cars, SUVs, vans, Jeeps, RVs, campers, trailers, and golf carts when the mounting path and wiring setup are suitable.

2. What should I do before installation?

Please test that the light strip turns on normally first, then clean and dry the hood or grille-line area where the strip will be pasted. If the weather is cold or the adhesive backing needs extra help, use the included adhesion promoter packs.

3. How do I connect the wires?

Connect the red wire to ACC positive and the black wire to negative / ground. Test the ACC fuse first, and make sure the fuse on the light strip is seated properly before final mounting.

4. What if I cannot find ACC?

Look for a fuse that has power when the vehicle is on and turns off when the vehicle is off, such as a suitable accessory or cigarette-lighter circuit. Do not connect the red wire directly to the battery terminals, or the strip may stay on and drain the battery.

5. Why did the light strip stop working?

This is often caused by a loose red or black wire connection, or by a fuse that is not seated properly. Please disconnect and reconnect the wires carefully, then check the fuse on the strip before testing again.

6. Why is the light flashing or turning off by itself?

Some vehicles, especially certain German or Korean models, may have current-limited protection on headlight or parking-light circuits. Connect the red wire to a proper ACC fuse instead of the car light circuit to help prevent this issue.

7. Why will the hood light strip not turn off?

This usually means the fuse you selected is always powered, even when the vehicle is off. Choose an ACC fuse that only has power when the vehicle is running or switched on.

8. Is this truck hood LED strip waterproof?

Yes. This product has an IP68 waterproof structure for exterior accent use. The light body is built for outdoor placement, but the wiring connection should still be protected carefully during installation.

9. Which length should I choose?

Please measure your truck hood edge or planned mounting path before ordering. Choose 71 inches for shorter paths, 79 inches for medium-width setups, and 87 inches when you need a longer front-end accent line.

10. What is included in the package?

Each package includes 1 truck hood LED light strip, 2 packs of adhesion promoter, and installation instruction. The selected variant determines the strip color and length.

We keep shipping and returns clear so you know what to expect before ordering.

Processing Time: Orders are typically processed within 1-3 business days after payment is confirmed.
Delivery Estimate: Estimated delivery is 5-20 business days worldwide after dispatch.
Tracking: A tracking number is sent by email after your order ships. Tracking updates may take 1-3 business days to appear.
Returns: Items that meet the return conditions may be requested for return or exchange within 30 days of delivery. Reasonable inspection is allowed; installation, use, damage, alteration, or missing parts may reduce the refund or make a return ineligible where permitted by law.
Damaged, Defective, or Incorrect Items: Please contact us within 48 hours of delivery with your order number and clear photos or videos so we can help quickly.

Need more details? Read our full Shipping Policy and Refund Policy.

See the Hood Light Across Different Front Ends

See how customers installed the hood light across different front ends, grille shapes, and nighttime setups.

Real customer installation photos shared in reviews on our TikTok Shop.

White truck hood LED light strip spanning the front end in a night parking lot. — Full-width white glow across a broad truck front end

White LED hood accent strip following a pickup grille line in a driveway at night. — Even hood-edge lighting on a driveway setup

White truck hood LED light strip creating a continuous front-end glow on a dark roadside. — Bright front-end accent on a dark roadside

Ice blue hood LED accent strip lighting the front edge of a truck at sunset. — Ice blue glow against a sunset city backdrop

Ice blue LED hood light tracing the grille line between illuminated headlights at night. — Grille-line accent between the headlights

White hood LED strip installed above a honeycomb grille for a clean front-end accent. — Close-up view of the strip along the grille edge

Choose a Length for Your Hood Path

The right size depends on the curved route you plan to follow, not only the width printed in a vehicle specification.

71 inches

A practical starting point for shorter hood paths, narrower front ends, or a centered accent line.

79 inches

The middle option for broader midsize and full-size front ends when you want more edge-to-edge coverage.

87 inches

Best suited to long, wide, or more strongly curved routing paths across a broad truck front end.

Measure before ordering: follow the exact curved mounting path with flexible tape or string. Choose the next available length above your measured route rather than relying on vehicle width alone.