App-Controlled Hood LED Strip for Car Front Styling

Q: 1. What makes this different from a headlight LED strip?

This version is designed for the hood line or upper grille line, so it creates a wider front-end glow across the vehicle. A headlight strip usually follows the shape of each headlight instead.

Q: 3. Can I control it by phone?

Yes. The strip supports app control and also includes a remote controller, so you can adjust colors, brightness, modes, speed, and music-style effects.

Q: 4. Does it have a startup animation?

Yes. The product is designed with a dynamic scanning start effect, so the hood line can animate when the light powers on.

Q: 5. How is it wired?

The red wire connects to ACC power, the black wire connects to ground / negative, the yellow wire connects to turn signal positive at close distance, and the blue wire connects to turn signal positive at long distance.

Q: 6. Is this hood light strip waterproof?

The product imagery states IP67 waterproof protection. For best results, keep wiring connections secure and avoid leaving loose exposed connectors in the engine bay.

1.2 m / 47 inch app-controlled RGB hood LED strip for shorter front-end accent layouts.

App-Controlled Hood LED Strip for Front-End Styling

$15.25 $19.06

Shipping calculated at checkout.

Give the front of your car a full-width glow that feels custom the moment it turns on. We made this app-controlled hood LED strip for drivers who want a dynamic scan startup effect, multicolor front-end styling, and a clean hood-line accent that can be tuned from the app or remote.

Full Hood-Line Styling

Runs across the hood or upper grille line for a wider front-end light signature than short headlight accent strips.
Dynamic scanning start effect gives the front end a more animated custom look when the light powers on.
Choose from 1.2 m to 2.2 m lengths to match compact cars, SUVs, trucks, or wider front grilles.
Multicolor RGB lighting lets you switch between clean white, bold color, gradient-style looks, and show-style modes.

App and Remote Control

Use the app or remote controller to adjust color, brightness, mode, speed, and music-style effects. The strip is designed for drivers who want the hood line to feel personal, whether the car is parked at night, rolling into a meet, or sitting in a driveway with a cleaner front-end glow.

Built for Exterior Placement

The product imagery highlights a smart chip, ultra-bright output, high-temperature resistance, IP67 waterproof protection, soft silicone material, and strong adhesive backing. Test the strip first, clean the mounting surface, and plan the wire route before final placement.

Product Type	App-controlled multicolor car hood LED light strip
Best For	Hood-line lighting, upper grille accents, dynamic front-end styling, and parked show setups
Light Source	LED
Color Pattern	Multicolor RGB
Control Method	App control and included remote controller
Lighting Effects	Dynamic scan startup effect, adjustable colors, dimmable brightness, mode control, speed control, and music-style effects
Length Options	1.2 m / 47 inches, 1.5 m / 59 inches, 1.8 m / 71 inches, 2.0 m / 79 inches, and 2.2 m / 87 inches
Strip Size	Approx. 1.4 cm / 0.55 in width and 0.5 cm / 0.2 in thickness
Material	Soft silicone light strip with strong adhesive backing
Protection	Smart chip / protection circuit
Durability Features	High-temperature resistance, waterproof structure, flexible silicone body, and consistent light output
Water Resistance	IP67 Waterproof
Power Source	Wired vehicle power
Wiring Method	Red wire to ACC power supply, black wire to ground / negative pole, yellow wire to turn signal positive at close distance, blue wire to turn signal positive at long distance
Fitment	Universal-style fit for many cars, SUVs, and trucks; measure the hood or upper grille path before ordering
Package Includes	Hood LED light strip, controller module, remote controller, instruction sheet, wiring, and adhesive backing
Item Condition	New

This hood LED strip is a wired exterior accent strip. Test it first, clean the hood or grille-line mounting area, then connect the wires according to the lighting behavior you want.

Before Installation

Choose a length that matches the hood or upper grille path before ordering.
Test the light strip before mounting to confirm it emits normally.
Clean and dry the surface where the strip will be pasted.
Dry-fit the strip along the hood line before removing the adhesive backing.

Wiring Guide

Red wire: Connect to ACC power supply so the hood strip can power with vehicle accessory power.
Black wire: Connect to ground / negative pole.
Yellow wire: Connect to turn signal positive at close distance when using the signal function.
Blue wire: Connect to turn signal positive at long distance when using the signal function.
Route safely: Keep wiring away from sharp edges, high heat, and moving parts in the engine bay.

Mounting Notes

Only peel the adhesive backing when the strip path is confirmed.
Adhesive works best on clean, dry, smooth surfaces.
Avoid sharply folding or pinching the silicone strip around tight bends.
Professional installation is recommended if you are not comfortable with vehicle wiring.

1. What makes this different from a headlight LED strip?

This version is designed for the hood line or upper grille line, so it creates a wider front-end glow across the vehicle. A headlight strip usually follows the shape of each headlight instead.

2. How do I choose the right length?

Measure the hood or upper grille path before ordering. Available lengths are 1.2 m / 47 inches, 1.5 m / 59 inches, 1.8 m / 71 inches, 2.0 m / 79 inches, and 2.2 m / 87 inches.

3. Can I control it by phone?

Yes. The strip supports app control and also includes a remote controller, so you can adjust colors, brightness, modes, speed, and music-style effects.

4. Does it have a startup animation?

Yes. The product is designed with a dynamic scanning start effect, so the hood line can animate when the light powers on.

5. How is it wired?

The red wire connects to ACC power, the black wire connects to ground / negative, the yellow wire connects to turn signal positive at close distance, and the blue wire connects to turn signal positive at long distance.

6. Is this hood light strip waterproof?

The product imagery states IP67 waterproof protection. For best results, keep wiring connections secure and avoid leaving loose exposed connectors in the engine bay.

7. What should I do before sticking it on?

Test the light first, clean the surface, dry-fit the strip along the hood line, and only peel the adhesive backing once the placement looks right.

We keep shipping and returns clear so you know what to expect before ordering.

Processing Time: Orders are typically processed within 1-3 business days after payment is confirmed.
Delivery Estimate: Estimated delivery is 5-14 business days worldwide after dispatch.
Tracking: A tracking number is sent by email after your order ships. Tracking updates may take 1-3 business days to appear.
Returns: Eligible items can be requested for return or exchange within 30 days of delivery when unused, uninstalled, and kept in original packaging.
Damaged, Defective, or Incorrect Items: Please contact us within 48 hours of delivery with your order number and clear photos or videos so we can help quickly.

Need more details? Read our full Shipping Policy and Refund Policy.

New Arrival: Dynamic Rear Trunk Light Strip

Upgrade your ride with our latest rear trunk light strip featuring a dynamic scan start-up effect. Sleek, eye-catching, and built to impress — turn every ignition into a show.