Skip to product information
2-piece Halloween RGB light set with remote control and mounting accessories for small spooky decoration areas.

Halloween RGB Decorative Lights for Car and Room Setups

Sale price  $8.56 Regular price  $10.70
Shipping calculated at checkout.
Number of Lights
PRODUCT DESCRIPTION

Halloween lighting should be easy to place, easy to control, and fun enough to change the whole mood after dark. These Halloween RGB decorative lights give your car, porch, room, pumpkin display, or party corner a small but vivid glow without wiring or a permanent setup.


Why You Will Like Them

  • Switch between 8 colors and 10 lighting modes for pumpkins, ghost decorations, parked-car displays, and party setups.
  • Control the lights from up to 7 meters / 23 ft with the wireless remote when your decorations are spread out.
  • Mount each light with a magic sticker or rubber band, so you can decorate temporarily and remove them after the season.
  • Recharge by USB and use the lights again for Halloween nights, themed rooms, trunk displays, or small accent setups.

Small Lights, Big Halloween Atmosphere

Each compact light has a rounded black body with two LEDs, giving you enough glow for accent details without bulky hardware. Use one color for a cleaner look, or switch to flashing, cycle, DIY, or memory modes when you want a more animated Halloween scene.


Made for Temporary Decor

These lights are best for seasonal decoration, not permanent vehicle lighting. Place them on clean, dry surfaces, keep them away from driving controls, and fully charge every light before your first setup so the remote can sync properly.

SPECIFICATIONS
Product Type Halloween RGB rechargeable decorative lights
Main Use Halloween car decor, pumpkin displays, party corners, room accents, and small seasonal lighting setups
Light Source LED
Color Modes 8 colors: white, red, green, blue, yellow, purple, ice blue, and pink
Lighting Modes 10 modes, including fast flashing, slow flashing, SOS, always-on, cycle, DIY, and memory function
Control Method Wireless remote control
Remote Range Up to 7 meters / 23 ft
Power Source Built-in 110mAh rechargeable battery
Charging Input 5V 1A USB charging
Charging Time 60 minutes
Runtime Up to 6 hours, depending on color, mode, and use conditions
Mounting Method Magic sticker or rubber band mounting
Size 4 cm / 1.57 inches long, 2 cm / 0.78 inches wide, 1.3 cm / 0.51 inches thick
Water Resistance Waterproof design
Pack Options 2 pcs, 4 pcs, 6 pcs, 8 pcs, or 10 pcs
Package Includes Selected number of RGB lights, matching mounting accessories, USB charging cable(s), and remote control
Certifications / Compliance FCC, CE, DOT, EU DoC, WEEE
Installation & Power

First Use Activation

  • Charge each light for at least 5 seconds to activate it before pairing. If a light has been stored for a long time, charge it for at least 30 minutes before testing.

Remote Pairing

  • After unplugging the light, it should enter pairing mode. Long press the ON button on the remote to connect. If the light responds, pairing is successful.

Charging

  • A full charge takes about 60 minutes with 5V 1A USB power. The indicator lights green while charging and turns off when fully charged.

Mounting

  • Use the magic sticker for flatter surfaces when you want easier removal for charging. Use the rubber band when you need a more flexible temporary hold. Clean and dry the surface before mounting.

Placement Safety

  • Use these lights as decorative accents. Keep them away from pedals, steering, gear selectors, hot surfaces, and any place where flashing light could distract you while driving.
FAQ

How do I activate the lights before first use?

Charge each light for at least 5 seconds first. After unplugging, long press the ON button on the remote to pair it. If the light responds, the remote is connected.

Why will one light not turn on?

If the light is new or has not been used for a while, charge it for at least 30 minutes and test it again. Also make sure the remote battery film has been removed and the light is close enough to the remote.

How do I know when the light is fully charged?

The indicator turns green while charging and turns off when the light is fully charged. A full charge usually takes about 60 minutes.

How long will the lights run?

Runtime can reach up to 6 hours, but it depends on the color, brightness, flashing mode, and how often you use the remote. Always-on modes usually last longer than frequent flashing modes.

Can I use these lights outdoors for Halloween decorations?

Yes, you can use them for suitable temporary Halloween decor, but they are not meant to be permanent exterior vehicle lights. Avoid long exposure to heavy rain, mud, road vibration, or high heat.

Why is the magic sticker not holding well?

Dust, oil, moisture, curved surfaces, fabric, and heat can weaken the adhesive. Clean and dry the area first, press firmly, and use the rubber band option when the surface is not ideal for adhesive mounting.
SHIPPING & RETURNS

We keep shipping and returns clear so you know what to expect before ordering.

  • Processing Time: Orders are typically processed within 1-3 business days after payment is confirmed.
  • Delivery Estimate: Estimated delivery is 5-14 business days worldwide after dispatch.
  • Tracking: A tracking number is sent by email after your order ships. Tracking updates may take 1-3 business days to appear.
  • Returns: Eligible items can be requested for return or exchange within 30 days of delivery when unused, uninstalled, and kept in original packaging.
  • Damaged, Defective, or Incorrect Items: Please contact us within 48 hours of delivery with your order number and clear photos or videos so we can help quickly.

Need more details? Read our full Shipping Policy and Refund Policy.

New Arrival: Dynamic Rear Trunk Light Strip

Upgrade your ride with our latest rear trunk light strip featuring a dynamic scan start-up effect. Sleek, eye-catching, and built to impress — turn every ignition into a show.

You may also like