Colorful Streamer LED Hood Strip for Decorative Front Glow
PRODUCT DESCRIPTION
Your truck's front end can look flat after dark, even when the headlights are on. We made this 24V colorful LED hood light strip for a brighter high-position front glow that adds motion, color, and a more custom look across the hood edge, grille area, cab line, or cargo body without cutting into the bodywork.
Why You Will Like It
- Creates a bold multicolor streamer effect for trucks, lorries, cargo vehicles, and long commercial-style front-end builds.
- Uses bright RGB5050 LED beads for stronger color presence than a plain single-color accent strip.
- Flexible silicone body follows long mounting paths while keeping the strip slim and low-profile.
- Choose from 100 cm to 240 cm lengths so you can match your hood, grille, cab, or cargo-body layout more closely.
Built for Long Vehicle Lines
This strip is made for larger visual surfaces where a short accent light can disappear. You can run it across the hood edge, upper cab area, grille line, side body, or another clean exterior mounting path to give your truck a more visible night signature.
Colorful Styling Without a Bulky Add-On
The ultra-thin flexible strip keeps the look cleaner than a rigid light bar. The multicolor LED layout gives your front end a show-style glow while the adhesive backing helps you mount it without drilling when the surface is clean, dry, and suitable. This model has no app or remote control, so it is best for a straightforward wired 24V accent setup.
Choose the Right Length
- 100 cm / 39 inches works for shorter accent paths.
- 120-150 cm / 47-59 inches fits many medium hood or grille-line layouts.
- 200-240 cm / 79-94 inches is better for wider trucks, cargo vehicles, cab lines, and longer body accents.
- Measure your planned mounting path before ordering so the strip looks intentional, not stretched or crowded.
SPECIFICATIONS
| Product Type | Flexible 24V colorful LED hood and truck front-end light strip |
|---|---|
| Best For | Truck hood edges, grille lines, cab accents, cargo-body styling, and long exterior accent paths |
| Lighting Effect | Multicolor streamer glow with high-position decorative front-end lighting |
| LED Type | RGB5050 LED beads |
| Color Pattern | Multicolor |
| Length Options | 100 cm / 39 inches, 120 cm / 47 inches, 150 cm / 59 inches, 200 cm / 79 inches, 220 cm / 87 inches, and 240 cm / 94 inches |
| Vehicle Fitment | Designed for 24V trucks, lorries, cargo vehicles, and long commercial-style exterior layouts; measure the mounting path before ordering |
| Rated Voltage | 24V only |
| Rated Power | 13W |
| Operating Temperature | -40 C to 70 C |
| Mounting Method | Rear adhesive backing on a clean, dry, suitable surface |
| Body Design | Ultra-thin flexible silicone strip |
| Water Resistance | IP68 Waterproof |
| Package Includes | 1 colorful LED light strip in the selected length and 1 instruction sheet |
| Control Method | Wired lighting setup; no app control and no remote control |
| Certifications / Compliance | FCC, CE, DOT, EU DoC, WEEE, RoHS |
INSTALLATION & POWER
This is a wired 24V exterior accent strip for long truck, lorry, or cargo-vehicle mounting paths. Test the light before installation, plan the length and position, then mount it only on a clean, dry, suitable surface.
Before You Install
- Test the LED strip first to confirm it lights normally before removing the adhesive backing.
- Measure the hood edge, grille line, cab line, or body accent path before choosing your length.
- Clean the mounting area carefully and let it dry fully before pressing the strip into place.
- Do not cut, pull hard, or bend the silicone strip sharply, because this can damage the waterproof structure or LED circuit.
- Avoid high-heat, moving, sharp-edge, or driver-distraction areas.
Mounting Guide
- Choose the path: Hold the strip along the planned hood, grille, cab, or body line before removing the adhesive backing.
- Prepare the surface: Remove dust, oil, wax, and moisture so the adhesive has a better chance to hold.
- Apply with steady pressure: Press the strip firmly along the full length instead of pulling or stretching it into position.
- Protect the wiring: Route the wire away from sharp metal edges, hot engine parts, hinges, and moving panels.
- Final test: Turn the strip on after mounting and confirm the color effect is even across the full length.
Power Notes
- Rated voltage: 24V only.
- Rated power: 13W.
- This product has no app control and no remote control.
- If you are not comfortable with vehicle wiring, we recommend professional installation.
- Protect all wiring connections carefully for exterior use.
FAQ
1. What should I do before installing the strip?
2. Which length should I choose?
3. Is this only for trucks?
4. Can I cut the strip shorter?
5. Why does the strip not stick well?
6. Is the strip waterproof?
7. What voltage does it use?
8. What is included in the package?
SHIPPING & RETURNS
We keep shipping and returns clear so you know what to expect before ordering.
- Processing Time: Orders are typically processed within 1-3 business days after payment is confirmed.
- Delivery Estimate: Estimated delivery is 5-14 business days worldwide after dispatch.
- Tracking: A tracking number is sent by email after your order ships. Tracking updates may take 1-3 business days to appear.
- Returns: Eligible items can be requested for return or exchange within 30 days of delivery when unused, uninstalled, and kept in original packaging.
- Damaged, Defective, or Incorrect Items: Please contact us within 48 hours of delivery with your order number and clear photos or videos so we can help quickly.
Need more details? Read our full Shipping Policy and Refund Policy.
New Arrival: Dynamic Rear Trunk Light Strip
Upgrade your ride with our latest rear trunk light strip featuring a dynamic scan start-up effect. Sleek, eye-catching, and built to impress — turn every ignition into a show.