Zu Produktinformationen springen
59 inches / 150 cm windshield RGB light strip kit for trimming along the dashboard edge before final installation.
  • 59 inches / 150 cm windshield RGB light strip kit for trimming along the dashboard edge before final installation.
  • Windshield ambient light strip adds a smooth RGB glow along the dashboard line for a cleaner night cabin look.
  • Push-to-fit RGB windshield light kit with silicone gap trim, remote, app control, and trim tool for dashboard installation.
  • App-controlled windshield RGB light strip with 16 million colors, dynamic lighting modes, and music sync cabin effects.
  • Windshield gap filler light strip helps seal the dashboard edge while adding dual-action RGB accent lighting.
  • Cuttable silicone windshield light strip with USB power, app and remote control, adhesive support, and flexible dashboard fit.
  • Windshield ambient light upgrade creates a brighter cabin accent while helping tidy the dashboard-to-glass gap.
  • No-glue windshield light strip installation uses push-fit silicone trim, clean cable routing, and USB power connection.
  • Windshield RGB light strip fitment notes explain gap size, app connection, and power setup before installation.
  • Windshield ambient light strip package includes the light kit, control accessories, trim tool, and installed front windshield effect.
  • Windshield ambient light strip video demonstrates dashboard gap placement, RGB cabin glow, and remote control setup.
Windschutzscheiben-Ambientelichtleiste mit Spaltfüllverkleidung

Windschutzscheiben-Ambientelichtleiste mit Spaltfüllverkleidung

€12,95
Inkl. Steuern. Versandkosten werden beim Checkout berechnet.
Größe
PRODUKTBESCHREIBUNG

Verleihen Sie Ihrer Armaturenbrettlinie mit einem einfachen Upgrade ein saubereres Finish und ein sanfteres Nachtleuchten. Wir haben diesen Ambiente-Lichtstreifen für Windschutzscheiben für Fahrer entwickelt, die eine RGB-Kabinenbeleuchtung, einen leiseren Windschutzscheibenspalt und eine bohrfreie Installation wünschen, die sich leicht testen lässt, bevor Sie sich für den endgültigen Look entscheiden.

Leuchten entlang der Windschutzscheibenlinie

  • Fügt ein sanftes Leuchten der unteren Windschutzscheibe entlang der Armaturenbrettkante hinzu, ohne Ihre Kabine zu überladen.
  • Hilft, den Spalt zwischen Windschutzscheibe und Armaturenbrett zu füllen, was Wind- und Fahrgeräusche in diesem Bereich reduzieren kann.
  • Verwendet App- und Fernbedienung, damit Sie Farben, dynamische Modi und Musik-Synchronisationseffekte von Ihrem Sitz aus ändern können.
  • Push-to-Fit-Silikonverkleidung ermöglicht die Installation ohne Klebstoff, Schrauben oder dauerhafte Innenraumänderungen.

Gebaut für einen saubereren Kabinenlook

Dieser Streifen ist nicht nur ein Licht, das auf das Armaturenbrett geklebt wird. Der flexible Silikonkörper drückt sich in den Spalt an der Basis der Windschutzscheibe und verleiht Ihrem Innenraum eine fertigere Linie, während er ein farbenfrohes Akzentdetail für Nachtfahrten, Parkplatzfotos, Wochenendtreffen oder eine persönlichere tägliche Einrichtung hinzufügt.

Zuschneiden, Anpassen und Steuern

Der 59 Zoll / 150 cm lange Streifen kann so zugeschnitten werden, dass er zu Ihrem Armaturenbrett passt. Beginnen Sie damit, ihn in den Spalt zu drücken, schneiden Sie nur die überschüssige Länge ab, verstecken Sie das Kabel ordentlich und schließen Sie dann die USB-Stromversorgung an. Wenn Ihr Fahrzeug einen größeren Spalt hat, verwenden Sie die mitgelieferte 3M-Klebeunterstützung, um den Streifen zu befestigen; wenn der Spalt zu klein ist, sitzt die Verkleidung möglicherweise nicht fest genug, um Geräusche zu reduzieren.

Farbe ohne aufwendige Installation

Sie können aus 16 Millionen Farben, dynamischen Beleuchtungsmodi und Musik-Synchronisationseffekten über die intelligente Controller-Einrichtung wählen. Wenn nach der Installation nur ein Teil des Streifens leuchtet, öffnen Sie die App-Einstellungen und stellen Sie den Pixelwert auf 200 ein, damit der gesamte Streifen korrekt aktiviert wird.
SPECIFICATIONS
Product Type Windshield RGB ambient light strip with dashboard gap filler trim
Best For Dashboard-edge ambient lighting, windshield gap trim, cabin accent styling, and light interior noise reduction
Length 59 inches / 150 cm
Fit Type Universal push-to-fit trim; confirm the dashboard and windshield gap before ordering
Vehicle Compatibility Suitable for many cars, SUVs, trucks, and vans with a compatible dashboard/windshield gap
Lighting Colors 16 million RGB color options
Lighting Modes Dynamic modes and music-sync effects through the controller setup
Control Method Smartphone app and remote control
Power Source USB plug-in power
Installation Method Push-to-fit silicone trim; no glue, screws, or drilling required for standard gap installation
Trim-to-Fit Can be cut to remove excess length after test fitting
Material Flexible silicone and plastic controller housing
Color Pattern Multicolor light strip with black trim body
Package Includes 1 windshield ambient light strip, controller setup, remote control, pry bar, instruction sheet, and adhesive support for larger gaps
Certifications FCC, CE, DOT, EU DoC, WEEE
INSTALLATION & POWER

This is a USB-powered push-to-fit windshield ambient light strip. Test the light first, confirm the dashboard gap, then press the silicone trim into place before trimming excess length.

Before You Install

  • Test the light strip, app control, remote control, and USB power before final installation.
  • Check that your dashboard/windshield gap is wide enough to hold the silicone trim securely.
  • Clean dust and oil from the dashboard gap area so the trim and any adhesive support can sit properly.
  • Plan the cable path before pressing the full strip into the gap.

Installation Steps

  1. Press the strip into the gap: Start at one side of the dashboard and press the silicone trim into the windshield gap by hand.
  2. Trim the extra length: After test fitting the full route, cut off only the excess strip length so the finished line follows your dashboard cleanly.
  3. Hide the cable: Guide the cable along the side trim or lower dashboard area so it does not hang across the driving area.
  4. Plug in the power supply: Connect the USB plug to a suitable USB power source, then test app and remote control before driving.
  5. Set the pixel value if needed: If only about 75% of the LEDs light up, open the app settings, find Pixel Setting, and adjust the value to 200.

Fit and Use Notes

  • For larger gaps, use the included 3M adhesive support to help secure the strip within the gap.
  • If the gap is too small, the LEDs may not fill the space tightly enough to help with noise reduction.
  • Keep the light path low along the windshield base and do not block visibility, vents, airbags, gauges, or driving controls.
  • Use calmer color or brightness settings at night if bright dynamic effects feel distracting while driving.
FAQ

1. Where does this windshield ambient light strip install?

It presses into the gap between your dashboard and windshield. You get a cleaner dashboard line, a soft RGB glow, and a trim effect that can help reduce wind or road-noise movement around that gap.

2. Do I need glue, screws, or drilling?

No. The main installation is push-to-fit. You press the flexible silicone trim into the dashboard gap, trim any excess length, hide the cable, and plug in the USB power supply.

3. What if my vehicle has a larger windshield gap?

If the gap is larger and the strip does not sit tightly, use the included 3M adhesive support to help secure it. Clean and dry the area first so the support holds better.

4. What if my dashboard gap is very small?

If the gap is too small, the strip may not fit tightly enough or may not give the same noise-reduction benefit. Please check your windshield/dashboard gap before ordering.

5. Can I cut the strip to fit my dashboard?

Yes. The strip is 59 inches / 150 cm and can be trimmed after you test the route. Measure first, install carefully, and cut only the extra length.

6. How do I control the colors and modes?

You can control the strip with the smartphone app or the included remote control. The lighting supports 16 million RGB colors, dynamic modes, and music-sync effects.

7. Why are only part of the LEDs lighting up?

Open the app settings, find the Pixel Setting section, and adjust the value to 200. This helps activate the full 59 inch / 150 cm strip.

8. Is this light strip safe to use while driving?

Use it as decorative ambient lighting and keep the strip low along the windshield base. Avoid brightness or flashing settings that distract you, and never install it where it blocks visibility, airbags, vents, gauges, or driving controls.

9. What is included in the package?

The package includes 1 windshield ambient light strip, controller setup, remote control, pry bar, instruction sheet, and adhesive support for larger gaps.
SHIPPING & RETURNS

We keep shipping and returns clear so you know what to expect before ordering.

  • Processing Time: Orders are typically processed within 1-3 business days after payment is confirmed.
  • Delivery Estimate: Estimated delivery is 5-14 business days worldwide after dispatch.
  • Tracking: A tracking number is sent by email after your order ships. Tracking updates may take 1-3 business days to appear.
  • Returns: Eligible items can be requested for return or exchange within 30 days of delivery when unused, uninstalled, and kept in original packaging.
  • Damaged, Defective, or Incorrect Items: Please contact us within 48 hours of delivery with your order number and clear photos or videos so we can help quickly.

Need more details? Read our full Shipping Policy and Refund Policy.

Das könnte Ihnen auch gefallen