Car Door Projector Installation Guide

Use this guide to place and test Tutu Car Light door projectors before final mounting.

Applies to

Wireless Car Door Projector Lights for Puddle Logos
Add wireless puddle logo projector lights to car doors for a cleaner welcome glow. Choose logo artwork and confirm door placement first.
Vehicle-Specific Puddle Logo Projector for Door Lighting
Upgrade compatible door lighting with a vehicle-specific puddle logo projector. Check your model fitment before ordering.
Custom Artwork Car Door Projector Lights by Diives
Project custom Diives artwork from your car door with rechargeable projector lights made for a personal welcome glow after dark.
Angel Wing Wireless Car Door Puddle Lights
Create a bright angel wing welcome effect when your car door opens at night with wireless adhesive puddle lights. No wiring or drilling required.

Before you start

Confirm which door projector version you have: universal wireless, vehicle-specific, custom artwork, or angel wing style.
Charge or prepare the light according to the product page and the accessories included in your package.
Clean the mounting area on the lower door panel and let it dry fully.
Test the projection direction in a darker area before sticking the light permanently.

Installation steps

Choose a flat spot on the lower inside door panel where the light can project onto the ground when the door opens.
Dry-fit the projector and check that it does not touch trim, weather stripping, wiring, drain holes, or the door sill.
If your kit uses adhesive, press firmly on a clean, dry surface. If your kit includes a sensor or magnetic trigger, position it according to the included parts and test before final mounting.
Open and close the door several times to confirm the light turns on and off as expected.
Check the projected logo or pattern from outside the vehicle and adjust placement if the image is tilted or cut off.

Common mistakes

Mounting before testing the projection angle.
Sticking the light to dusty, textured, wet, or oily trim.
Placing the light where shoes, door seals, or road moisture can hit it easily.

When to contact us

Contact support if the projector will not turn on after charging or battery setup, the trigger does not respond after repositioning, or the custom artwork does not match your approved design.