Step 1 — Apply the Tape
Peel off one side of the double-sided tape and stick it to the base of the welcome light.
Step 2 — Mount the Light
Remove the red film and press the light firmly onto the car door surface.
Step 3 — Adjust the Angle
Keep the projection head as vertical to the ground as possible.
Stick it slightly above the bottom edge of the door.
Step 4 — Place the Infrared Sticker
If the light stays on after closing the door,
attach the included infrared sticker to the inner part of the door frame to help it turn off automatically.
📘 Tips for Best Results
-
Clean and dry the surface before applying.
-
Press firmly for a few seconds to ensure a secure bond.
-
Avoid repositioning once applied to maintain adhesion.